Teklogix 7035, 8255 & 8260 Terminals User Manual D-5
Appendix D: Radio Parameters
TRX7431 WaveLAN/IEEE 802.11 DS SS Radios
802.1X
802.1X is the IEEE standard that offers additional security for local area networks
using Agere/Lucent WaveLAN radios (TRX7431). It provides authentication for
user devices attached to an Ethernet network, whether wired or wireless.
To activate 802.1X authentication:
• Set 802.1X to ‘Y’.
• Press <F1> to display the 802.1X sub-menu.
Stored User ID
When ‘Stored User ID’ is set to ‘Y’, the ‘User Name’ and ‘Password’ assigned
in this parameter sub-menu are used for 802.1X authentication. If ‘Stored User ID’
is disabled, you will be prompted to enter a user name and password when the
terminal is powered up.
User Name And Password
The ‘Name’ and ‘Password’ assigned at this sub-menu are used by the access
points and RADIUS server on the network to authenticate the packets sent from
your terminal.
• Enter a unique user name and password in the string entry fields.
Important: If 802.1X is enabled, authentication will operate only if the access
points and RADIUS server on your network are configured for
EAP MD5 authentication. For 9150 configuration information,
refer to the “9150 Wireless Gateway User Manual” – PN 80440.
Stored User ID Y» see text
Range
802.1X
User Name see text
Password see text
Range
Stored User ID
To Next Page
Loading...