5–Managing Switches
Viewing Switch Information
59266-01 B 5-11
Login Level Authority level of the user name
Super User Super user privileges Enabled or Disabled
UserAuthentication
Enabled
Enforcement of account names and authority (always True)
Firmware Group
Firmware Version Active firmware version
Inactive Firmware Ver-
sion
This field does not apply to this switch
Pending Firmware Ver-
sion
Firmware version that is activated at the next reset
PROM/Flasher Version Installed version of PROM firmware
Services Group
NTP Client Enabled Enables switches to synchronize their time to a centralized
server. Enabled or Disabled.
NTP Server Address IP address of the centralized NTP server. Ethernet connection
to NTP server is required.
FDMI Enable Fabric Device Management Interface status. If enabled,
device information can be obtained, managed, and saved
through the fabric using Name Service Management Server
functions. If FDMI is Enabled on the entry switch, Enterprise
Fabric Suite reports all FDMI information reported by the entry
switch.
FDMI HBA Entry Limit Maximum number of HBAs that can be registered with a
switch
Embedded GUI
Enabled
Web applet status. Indicates whether the web applet on the
switch is Enabled or Disabled.
Inactivity Timeout Number of minutes the switch waits before terminating an idle
command line interface (CLI) session. Zero (0) disables the
timeout threshold.
GUI Mgmt Enabled Web applet status. If this option is disabled, the switch cannot
be managed using the web applet.
Telnet Enabled Telnet client status Enabled or Disabled
Table 5-1. Switch Data Window Fields (Continued)
Field Description
To Next Page
Loading...
Need help?
General
