Qlogic 5800V Series User Manual

5–Managing Switches
Viewing Switch Information
5-10 59266-01 B
Test Fault Code Code value for the last recorded diagnostic test status
recorded on the switch
Network Group
IPv4 Enabled Internet Protocol version 4 Enabled or Disabled
IPv4 Address Internet Protocol version 4 address
IPv4 Subnet Mask Mask that determines the IP address subnet
IPv4 Gateway Gateway address
IPv6 Enabled Internet Protocol version 6 Enabled or Disabled
IPv6 Address Mask that determines the IP address subnet
IPv6 Gateway Gateway address
SNMP Enabled SNMP Enabled or Disabled
SNMP v3 Security
Enabled
SNMP v3 Security Enabled or Disabled
Broadcast Support Broadcast support status. Broadcast support is enabled
(default) or disabled.
NTP Client Enabled NTP Client Enabled or Disabled. If Enabled, this parameter
enables switches to synchronize their time to a centralized
server.
NTP Server Address IP address of the centralized NTP server. Ethernet connection
to NTP server is required.
DNS Enabled Domain Name Service Enabled or Disabled
Configured Local Host-
name
Requested hostname for the switch. If a fully qualified domain
name is given, the domain suffix is used as the first suffix in
the DNS search list for DNS lookups performed by the switch.
Assigned Hostname Actual hostname for the switch. If a fully qualified domain
name is given, the domain suffix is used as the first suffix in
the DNS search list for DNS lookups performed by the switch.
IPv6 Assigned
Address (1–20)
The set of IPv6 addresses assigned by DHCP v6, NDP, or the
switch administrator
User Login Group
User Name Account name
Table 5-1. Switch Data Window Fields (Continued)
Field Description

Qlogic 5800V Series Specifications

General

Brand	Qlogic
Model	5800V Series
Category	Switch
Language	English