FAX UNIT
B404 1-6 SM
17. Plug in the machine and turn on the main power switch.
NOTE: The copier must be connected to a properly-grounded socket outlet.
18. Press the “Facsimile” key. At this time, the display shows: Call Service FAX
SC1201 Data should be initialized.
NOTE: This is not a functional problem. The machine shows this message only
when the fax unit is first installed. If the same message appears at the
next power on, check whether the battery switch on the FCU has been
turned on.
19. Press “OK” to initialize the fax unit.
11. Be sure to set the clock. (Date and time ☛ Operation Manual Advanced
Features / 5. Facsimile User Tools)
21. Program items required for fax communication.
To Next Page
Loading...
