Error Codes
D649 22 SM
Code Meaning Suggested Cause/Action
0-15
The other terminal is not
capable of specific
functions.
The other terminal is not capable of accepting the
following functions, or the other terminal’s memory
is full.
Confidential rx
T ransfer function
SEP/ SUB/PWD/SID
0-16
CFR or FTT not detected
after modem training in
confidential or transfer
mode
Check the line connection.
Replace the FCU.
Try adjusting the tx level and/or cable
equalizer settings.
The other end may have disconnected, or it
may be defective; try calling another machine.
If the rx signal level is too low, there may be a
line problem.
Cross reference
See error code 0-08.
0-17
Communication was
interrupted by pressing the
stop key
If the Stop key was not pressed and this error
keeps occurring, replace the operation panel
or the operation panel drive board.
0-20
Facsimile data not
received within 6 s of
retraining
Check the line connection.
Replace the FCU.
Check for line problems.
Try calling another fax machine.
Try adjusting the reconstruction time for the
first line and/or rx cable equalizer setting.
Cross reference
Reconstruction time - G3 Switch 0A, bit 6
Rx cable equalizer - G3 Switch 07 (PSTN)
To Next Page
Loading...
