Ricoh D117 - Page 854

Main SP Tables-5
D117/D118 3-352 SM Appendix
052
ECP (Centro) *CTL
[0 or 1 / 1 / 1/step]
0: Disabled, 1: Enabled
Enables or disables ECP Compatibility.
 This SP is activated only when SP5-828-50 is set to "1".
065
Job Spooling *CTL
[0 or 1 / 0 / 1/step]
0: Disabled, 1: Enabled
Enables/disables Job Spooling.
066
Job Spooling Clear: Start
Time
*CTL
[0 or 1 / 1 / 1/step]
0: Data is cleared)
1: Automatically printed
Treatment of the job when a spooled job exists at power on.
069
Job Spooling (Protocol) *CTL
[ - / 0x7f : All Active / -]
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: sftp
bit7: wsprnd
Validates or invalidates the job spooling function for each protocol.
087
Protocol usage *CTL [0 or 1 / 0x00000000 / 1/step]
090
TELNET (0: OFF 1: ON) *CTL
[0 or 1 / 1 / 1/step]
0: Disable, 1: Enable
Enables or disables the Telnet protocol.
091
Web (0: OFF 1: ON) *CTL
[0 or 1 / 1 / 1/step]
0: Disable, 1: Enable
Enables or disables the Web operation.