EasyManua.ls Logo

Ricoh D117 - Page 855

Ricoh D117
1207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Main SP Tables-5
SM Appendix 3-353 D117/D118
Appendix:
SP Mode
Tables
145
Active IPv6 Link Local
Address
CTL [- / - / -]
This is the IPv6 local address link referenced on the Ethernet or wireless LAN
(802.11b) in the format:
"Link Local Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits
each.
147
149
151
153
155
SettingActive IPv6 Stateless
Address 1~5
CTL [- / - / -]
These SPs are the IPv6 status addresses (1 to 5) referenced on the Ethernet
or wireless LAN (802.11b) in the format:
"Status Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits
each.
156
IPv6 Manual Address *CTL [- / - / -]
This SP is the IPv6 manually set address referenced on the Ethernet or
wireless LAN (802.11b) in the format:
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits
each.
158
IPv6 Gateway Address *CTL [- / - / -]
This SP is the IPv6 gateway address referenced on the Ethernet or wireless
LAN (802.11b). The IPv6 address consists of a total 128 bits configured in 8
blocks of 16 bits each.
161
IPv6 Stateless Auto Setting *CTL
[0 or 1 / 1 / 1/step]
0: Disable, 1: Enable
Enables or disables the automatic setting for IPv6 stateless.

Table of Contents

Related product manuals