Roche Diagnostics
124 Instructions for Use · Version 13.0
4 Theoretical foundations cobas b 123 POC system
Assigning a correlation factor to a parameter
A dialog box appears on the screen.
Figure 4-12 Editing correlation factors screen
3
To edit this correlation factor, press the button in the bottom panel of the
screen. Enter your new offset and/or slope using the numeric keyboard box that
appears on the screen.
4
To apply your new correlation factor, press the OK button.
s
p To delete a correlation factor to a parameter
1
Utilities > Configuration > Measurement > Correlations
Figure 4-13 Correlations setup screen
2
In the Set correlation factors panel, use the drop-down list to choose which
correlation factors that you want to delete. Then, press the Delete button.
s
To Next Page
Loading...
