Roche Diagnostics
204 Instructions for Use · Version 13.0
7 Quality control cobas b 123 POC system
Defining and configuring QC materials
2
In the Setup QC material panel, press the New button.
The following window appears on the screen:
Figure 7-33 QC setup wizard window
3
To enter the QC material’s information, scan the material and range codes from
its package insert using a barcode scanner.
4
Verify that the barcodes were scanned correctly by checking the displayed
information on the instrument. Then, press the OK button.
5
To apply your changes, press the OK button.
s
p To edit the ranges for a QC material
1
Utilities > Configuration > Quality control > Material definition > Setup
Figure 7-34 QC scheduler screen
To Next Page
Loading...
