Roche cobas b 123 User Manual

Roche Diagnostics
Instructions for Use · Version 13.0 253
cobas b 123 POC system 10 Software functions
Description of the screen areas
u Quality control (p. 179)
Parameter selection field You can select parameters or a parameter group for a specific measurement. Also, the
status of the individual parameters is indicated.
Figure 10-6 Parameter selection field
If a parameter is not ready, you can press its parameter button to view its status
report.
Parameter groups make it easier for you to activate the measurement parameters you
use most on the Overview tab. You can create up to 3 user-defined parameter groups
with this feature.
A Parameter group button B Parameter buttons
Parameter is activated and ready for measurement.
Parameter is temporarily deactivated, but ready for measurement.
Parameter is activated and ready for measurement, but there is a QC warning
assigned.
Parameter is temporarily deactivated, but ready for measurement. However,
there is a QC warning assigned.
Parameter is not ready for measurement because it is not calibrated, or has
been remotely locked.
Parameter is not ready for measurement because there is a QC lock on this
parameter.
Parameter is permanently deactivated.
The Info button shows the status report for all parameters that are not ready.
Parameter group button
A
B

Roche cobas b 123 Specifications

General

Brand	Roche
Model	cobas b 123
Category	Medical Equipment
Language	English