Roche cobas b 123 User Manual

Roche Diagnostics
Instructions for Use · Version 13.0 345
cobas b 123 POC system
System calibration - Workplace tab
System calibration Consists of the wavelength
calibration of the polychromator (optional), calibration
of the oximeter module lamps (optional), cuvette layer
thickness calibration (optional), O
2
air calibration, the
determining of the O
2
value of the standby solution, and
the 2-point calibration of all of the parameters. It is
performed every 24 hours.
System stop Critical error which stops the instrument.
You cannot perform measurements or calibrations
during a system stop.
Tonometered whole blood Whole blood is set with
the aid of precision gas to expected values to be
calculated for PO
2
and PCO
2
.
Tonometry Modifying PO
2
and PCO
2
partial pressures
in a fluid using precision gas.
Troubleshooting report User-generated report of
errors that the user cannot successfully troubleshoot on
the system. It is intended to help Roche Service
representatives assess and solve these errors.
Utilities tab Location on the user interface where you
can perform installation, put out of operation and
shutdown procedures, software updates, system
configurations and export and import of troubleshooting
information.
Warnings Advance notifications of possible issues with
the instrument or consumables. You can perform
measurements, but you may not be able to perform
specific functions if it involves the affected module of the
instrument or the consumable.
Workplace tab Location on the user interface where
you can start consumable changes, perform QC and
CVC measurements, and view databases.

Roche cobas b 123 Specifications

General

Brand	Roche
Model	cobas b 123
Category	Medical Equipment
Language	English