Rohde & Schwarz SMAB-B92 - Page 610

Remote Control Commands
R&S
®
SMA100B
608User Manual 1178.3834.02 ─ 05
Parameters:
<Period> float
Range: 1E-6 to 100
Increment: 1E-8
*RST: 1E-3
Example: See Example "Configuring the LF generator" on page 600.
Manual operation: See "Period" on page 101
[:SOURce<hw>]:LFOutput<ch>:SHAPe:TRAPeze:RISE <Rise>
Selects the rise time for the trapezoid shape of the LF generator.
Parameters:
<Rise> float
Range: 1E-6 to 100
Increment: 10E-9
*RST: 250E-6
Example: See Example "Configuring the LF generator" on page 600.
Manual operation: See "Trapezoid Rise / Fall" on page 101
[:SOURce<hw>]:LFOutput<ch>:SHAPe:TRIangle:PERiod <Period>
Sets the period of the generated pulse. The period determines the repetition frequency
of the internal signal.
Parameters:
<Period> float
Range: 1E-6 to 100
Increment: 10E-9
*RST: 0.001
Example: See Example "Configuring the LF generator" on page 600.
Manual operation: See "Period" on page 101
[:SOURce<hw>]:LFOutput<ch>:SHAPe:TRIangle:RISE <Rise>
Selects the rise time for the triangle single of the LF generator.
Parameters:
<Rise> float
Range: 1E-6 to 100
Increment: 10E-9
*RST: 0.5E-3
Example: See Example "Configuring the LF generator" on page 600.
Manual operation: See "Triangle Rise" on page 101
SOURce Subsystem