DescriptionCommand
Play the current media item loaded in the
selected Media-Store.
1. Press GS, GSA, or ME and use the
GS, GSA, or ME knob to select the
Media-Store you want to play the
media item on.
2. Press Channel and use the Channel
knob to select the channel of the
selected Media-Store that you want
to play the media item on.
MSPLAY
Select a source for a box on a
MultiViewer.
1. Select the type of source you want
to select and use the Src X knob to
select the source you want to select.
2. Press MV and use the MV knob to
select the MultiViewer you want to
select a source on.
3. Press Box and use the Box knob to
select the box on the MultiViewer
that you want to assign the source
to.
MVBOX
Take the current selection in the
Sequencer to air and advance the current
selection to the next item in the list.
Next
Take the current selection in the
Sequencer to air.
Read
Performs an ALL+ALL soft reset on the
switcher.
RESETALL
Resume a specific layer in a specific
frame-buffer.
1. Press Layer ID and use the Layer
ID knob to select the layer you want
to use.
2. Press Buffer ID and use the Buffer
ID knob to select the frame-buffer
you want to use.
Resume
Store a switcher set.
1. Press Disk and use the Disk knob
to select the location of the set you
want to store.
2. Press Set, enter the name of the set
you want to store, and press Accept
New Name.
SAVESET
Load a template to air on a specific layer
to the output channel selected in the
template. The Sequencer focus moves to
this item.
1. Press Take ID and use the Take ID
knob to select the take id for the
template you want to load.
2. Press Layer ID and use the Layer
ID knob to select the layer you want
to use.
SeqIn
DescriptionCommand
Take a template off-air.
• Press Take ID and use the Take ID
knob to select the take id for the
template you want to load.
SeqOut
Set the video format that you want the
switcher to operate in.
1. Press Vid/Ref and use the Vid/Ref
knob to select VID.
2. Press Format and use the Format
knob to select the video format you
want the switcher to operate in.
SETVIDMODE
Recall an existing basic preset Preset ID
on the device.
SpyderBPR
Recall a single predefined function key
Function Key on the device.
SpyderFKR
Recall a register Register ID at a specific
cue Script Cue on the device.
SpyderRSC
Load a template to air in a specific
frame-buffer and on a specific layer.
1. Press Take ID and use the Take ID
knob to select the take id for the
template you want to load.
2. Press Layer ID and use the Layer
ID knob to select the layer you want
to use.
3. Press Buffer ID and use the Buffer
ID knob to select the frame-buffer
you want to use.
Take
Select what is included in the next ME
transition.
1. Press the ME X button for the ME
that you want to set the next
transition for.
2. Select the key(s) and/or background
that you want to include in the next
transition.
TRANSINC
Select a new transition rate for an ME.
1. Press the ME X button for the ME
that you want to set the new rate for.
2. Press Num of Frames and use the
Num of Frames knob to select the
length of the transition in frames.
TRANSRATE
Select a transition type for an ME.
1. Press the ME X button for the ME
that you want to set the transition
type for.
2. Press Type and use the Type knob
to select the type of transition you
want to perform.
TRANSTYPE
Enter a manual RossTalk command.TypeInCmd
Move the current selection in the
Sequencer to the item above in the list.
Up
Acuity Operation Manual (v9.2) — Custom Controls • 93
To Next Page
Loading...
Need help?
General
