Function Variants Crane Scale
6.4.4 Standard Operating Sequence
This item reflects a typical operating sequence of a crane scale:
Action
Display (e.g.)
Key; Comments
1. DISOMAT B plus must
be in home position!
Set display type: 'NET'
G 0.0 kg If scale display does not read zero:
->'Zero Scale' key
2.Hook on ropes or cross-
members, acquire tare.
G 103.5 kg
'Acquire Tare' key
Net T 0.0 kg
Scale is tared
3. Pick up load. 205.0 kg Scale shows NET weight. Net T
4.If need be, enter weigh
packaging or shopping
pallets as manual tare
value, or select value from
list of Fixed Tare values.
Not necessary if it
t of
em 2 has
en performed.
do.
put' key or 'Fixed
Tare' selection
be
'Manual Tare In
or
A quire input with key
do.
c
5. If need be, enter string.
do.
'Enter String' key
6. Weigh and print.
do.
+
Print or store weigh data. Relieve
crane to perform next weighing
operation.
7. Totally relieve scale.
8. Clear tare memory.
G 308.5 kg
Weighing is complete. Remove load
from scale, and scale is ready for
next weighing operation.
DISOMAT
®
Opus – Operating Manual 0630 BV-H2313 GB
© Schenck Process GmbH, Darmstadt - 111 -
To Next Page
Loading...
Need help?
General
