Schenck process Disomat Opus User Manual

Event Messages List of Event Messages
7.2 List of Event Messages
Sample for inspection
Display Text Edit *) Cause Remedy
W0104:Timeout * With internal command
processing
W0104-1:Timeout * ZEUS first weight acquisition
W0104-2:Timeout * ZEUS second weight acquistion
W0104-3:Timeout * ZEUS single weight acquisition
W0110:Timeout
*
With internal command
processing
A0209:Powerfail *
A0309-nnn:Restart **) *
A0401:Parameter Error DISONET
A0401-1:Parameter Error DISONET slave list
A0401-2:Parameter Error DISONET routing table
A0402-1:Parameter Error EDP configuration
A0404-1:Parameter Error Function block
parameters/linkages
Re-acquire
parameters.
A0404-2:Parameter Error Analog output calibration Re-calibrate
analog output.
A0404-3:Parameter Error Material data
A0404-4:Parameter Error Maximum dW/dt
A0404-5:Parameter Error Collective load memory
A0404-6:Parameter Error SWA:Material data, part 2
A0404-7:Parameter Error SWA:Material data, part 3
A0405-1:Parameter Error Event classes
A0405-2:Parameter Error Print texts Re-acquire texts
or load default
texts
A0405-3:Parameter Error Print formats Re-acquire
formats or load
default formats
A0406-10:Parameter Error Fixed tare data
A0406-11:Parameter Error Materials file
A0407:Parameter Error Printer configuration
A0409:Parameter Error National settings
A0409-1:Parameter Error DISOPLAN
A0410:Parameter Error DT control
A0411-1:Parameter Error Scale 1 calibration parameters
A0412-1:Parameter Error Scale 2 calibration parameters
A0413-1:Parameter Error Twin-unit calibration
parameters
A0411-2:Parameter Error Scale 1 scale parameters
A0412-2:Parameter Error Scale 2 scale parameters
A0413-2:Parameter Error Twin-unit scale parameters
A0411-4:Parameter Error Calibration parameters Part 2
DISOMAT
®
Opus – Operating Manual 0630 BV-H2313 GB
© Schenck Process GmbH, Darmstadt - 133 -

Schenck process Disomat Opus Specifications

General

Brand	Schenck process
Model	Disomat Opus
Category	Control Panel
Language	English