DISOMAT Overview General Control
'Normal Mode' (see Chapter 4) comprises the functionality used in daily operation
without password input.
de' (see Chapter 5) comprises the functionality required for system setting
nd protected by a graded password system. Depending on system type, a special
assword must be entered. There are the following classes of password:
• Parametrization
• Configuration
• Calibration
3.5 General Control
While the operation in 'Home Position' is reduced to comparatively few keys, the use
of the versatile functions in the 'Menu Tree' operating state requires detailed system
knowledge.
Despite its complex functionality, the system is relatively easy to handle thanks to the
small number of elementary operating sequences. As you will come across these
sequences, again and again, we explain them in detail in this chapter. In the chapters
to follow, the actual functionality is presented in the form of 'catalog' items.
The display is used to input and output scale information and manually operate the
scale functions in the form of dialogs.
The daily user uses
• Home position functions
• Menu tree functions
'Setting Mo
a
p
DISOMAT
®
Opus – Operating Manual 0630 BV-H2313 GB
© Schenck Process GmbH, Darmstadt - 17 -
To Next Page
Loading...
