Schenck process Disomat Opus - Fct. 467:Reset Consecutive Number; Fct. 468:Load Default Form

Setting Mode Setting Using Parameter Password
Operating Sequence
Input field displays (default) format string:
466:Legal-For-Trade Memory Format
L-F-T Memory Format BZ____________________
In addition, the first string (code BZ = BZ1) is stored in legal-for-trade memory.
Change format and acknowledge with [ENTER] key.
5.2.1.7 Fct. 467:Reset Consecutive Number
Use menu item to reset parameter 'Consecutive number of weighing' to '0'.
Consecutive number increments by 1 after every printout performed automatically or
manually, via keyboard or menu tree.
NOTE: There is no relation between parameters 'Consecutive number of weighing'
and 'Max. Dumps'.
Operating Sequence
After start of function, system outputs the following safety prompt:
467:Reset Consecutive Number
Acknowledge: Yes__
Acknowledge with [ENTER] key or select 'No'.
5.2.1.8 Fct. 468:Load Default Form
Use menu item to load the default settings for six form formats, page header and
EDP format.
ATTENTION: Default settings overwrite any previous change.
Operating Sequence
After start of function, system outputs the following safety prompt:
468:Load Default Form
Acknowledge: Yes__
Acknowledge with [ENTER] key or select 'No'.
BV-H2313 GB 0630 DISOMAT
®
Opus – Operating Manual
- 54 - © Schenck Process GmbH, Darmstadt