Schenck process Disomat Opus User Manual

Setting Mode Setting Using Calibration Password
5.4 Setting Using Calibration Password
After input of the calibration password, you can access
• 'Basic functionality' (see Item 4.2)
• Additional functions as described below (see: Table, Figure)
Menu Items Comments
44:SCALE
441:Calibration parameters
442:Special scales
443:Conf. l.f.t memory
444:Scale parameters
445:CALIBRATION
4451:Deadweight
4452:Linearization
4453:Range
4454:Set current range
4455:Resolution x 10
Complete scale calibration activities:
• Change scale parameters
• Change calibration parameters
• Change mode and calibration parameters
of small, or medium, weighing range (with
multi-divisional/multi-range scales)
• Calibrate and linearize scale (deadload and
range)
• Activate "legal-for-trade" memory
Additional menu items with calibration password
(see Item 5.1.1)
DISOMAT
®
Opus – Operating Manual 0630 BV-H2313 GB
© Schenck Process GmbH, Darmstadt - 73 -

Schenck process Disomat Opus Specifications

General

Brand	Schenck process
Model	Disomat Opus
Category	Control Panel
Language	English