Normal Mode General Control
4 Normal Mode
Operating mode 'Normal Mode' can be called without password input. This mode
comprises:
Home Position Functions
These functions are designed for use in daily operation with no need for detailed
system knowledge. The daily user will primarily use the keys of the operating block.
• He will use weighing function keys, e.g. 'Zero Scale', 'Acquire Tare', 'Clear
Tare' to perform basic weighing functions.
• Using function keys and residual keys, he can perform functions like 'Print
Weigh Slip', etc.
• To check the system as such, he can start the integrated self-testing function.
• He can adjust display contrast to ambient brightness.
Menu Tree Functions
The skilled user will use further functions in daily operation which can be accessed
via the first and second menu tree level. Some of these functions can be called up by
function key operation.
Examples:
Enter: - Setpoint
- String
- Manual Tare
Select: - Fixed Tare
Display:
- Gross
- Balance
- Software version
Start: - Print functions
Set: - Date
- Time
BV-H2313 GB 0630 DISOMAT
®
Opus – Operating Manual
- 26 - © Schenck Process GmbH, Darmstadt
To Next Page
Loading...
Need help?
General
