Normal Mode Functionality in Menu Tree
Flash log file:
The entries from #7 show the history of the last registered loading processes with
information on who did load what software into the unit at what time.
The following is stored for each loading process (refer to #8a and #8b) such as
Line: Information: where:
31:DOp vww20700/002
31 = the number of the loading process
a
L:14.07.06 08:48
L = loading date/loading time
U:<DISOPLAN User>
U = user (from the loading program)
b
C:Schenck Process GmbH
C = Company (ditto)
The log file can have as many as 60 entries.
4.2.4.3 Fct. 53:Display Type
Use function to determine the weight display default settings:
• Default = Net [Net]
Normally, DISOMAT comes set for NET display provided that a tare value is
stored (T or PT symbol). If you clear tare memory, display automatically
changes to GROSS weight. After acquisition of a new tare value, display
returns to default. If you want to know GROSS weight, use the 'a:Display
Gross' function.
• Default = Gross [G]
Some weighing applications require the GROSS weight to be permanently
set. This is independent of tare memory. The gross weight is always shown in
the display regardless of whether the tare memory is set or cleared. There is
no menu item for NET display.
After selection of function a scroll field appears, for you to select:
53:Display Type
Display: Net
Select between Net and Gross.
NOTE: If GROSS display is set as default, call of the 'a:Display Gross' function is
ineffective.
4.2.4.4 Fct. 54:Search Legal-For-Trade Memory
Use function for display and printout of weighing results stored in legal-for-trade
memory.
You can search for data
• stemming from a certain day date
• appertaining to a certain consecutive number
• including a certain text.
BV-H2313 GB 0630 DISOMAT
®
Opus – Operating Manual
- 34 - © Schenck Process GmbH, Darmstadt
To Next Page
Loading...
Need help?
General
