Schenck process Disomat Opus - Page 41

Normal Mode Functionality in Menu Tree
Operating Sequence
After call of function, the date input field opens and displays default:
54:Search L-f-T Memory
Date 01.01.00
Attention: Remember date input instructions given at the '51:Date/Time' item.
Input field for consecutive number opens:
54:Search L-f-T Memory
Cons. No. ___0
Then you can enter text to be searched in strings:
54:Search L-f-T Memory
String __________________
Start searching with [OK] key.
Result
If the search
• fails, display reads: 'No further inputs found'
• was successful, first data record found is displayed. Display other hits with
[ENTER] key.
When searching for data records, the 3 possible default settings are AND-
interlinked, i.e. system exclusively finds data records meeting all three
criteria. To do so, best restart function and leave default value in the input
field of the unused criterion (same effect as 'Ignore Field').
Exit function using [ABORT] or [OK] key.
Pressing of [OK] key lets you print the hits.
54:Search Legal-for-trade Memory
Print
No
You can select: [No| Last Display | All Inputs Found]:
• 'No': No printout
• 'Last Display': Print data record displayed last.
• 'All Inputs Found': Print all data records meeting the selected criteria.
You can abort printing using any key.
DISOMAT
®
Opus – Operating Manual 0630 BV-H2313 GB
© Schenck Process GmbH, Darmstadt - 35 -