Normal Mode Functionality in Menu Tree
Go to Internet address
http://bvwww.schenck.net (Product Service Homepage),
click on desired product and complete the 'Name:' and 'Access code for product:'
fields.
Make sure input is correct, press [Send], and the desired information is available.
4.2.12 Fct. d:Ackn. Event
Designed to inform you, the event messages must be observed. Depending on class
of event on DISOMAT, some messages efface after some seconds while others, e.g.
messages of the 'Warning', 'Alarm' and 'Fault' classes require to be acknowledged.
Use function to react on event messages.
Operating Sequence
:Ackn. Event
Never acknowledge event messages before cause of fault has been
removed.
d
[ENTER] key acknowledges the most significant event available.
If current privilege does not allow for acknowledgement, system automatically
prompts for input of a higher-privilege password.
or details on event messages, see Chapter 7.
F
BV-H2313 GB 0630 DISOMAT
®
Opus – Operating Manual
- 40 - © Schenck Process GmbH, Darmstadt
To Next Page
Loading...
Need help?
General
