Normal Mode Functionality in Menu Tree
Example:
You wish to acquire the weight of a bulk solid (NET weight) stored in a drum. Drum
weight (TARE weight) is n
TARE weight in manual.
A
oted on drum. Weigh filled drum (GROSS weight) and enter
dvantage: You need not weigh empty drum before filling.
easily matched to ambient brightness if needed for lighting.
uence
4.2.8 Fct. 9:Contrast
Display contrast can be
Operating Seq
9:Contrast
After calling up the function, the following instruction appears:
<- OK ENTER ->
It shows what keys you can use to change contrast:
<- OK ENTER ->
decrease store settings increase
e (time-
ut), it stores the present settings and the function is automatically ended.
ht.
erequisite: Display currently shows NET weight.
Operating Sequence
:Display Gross
You can match contrast with the direction keys and you can store settings with the
[OK] or [ENTER] button. If there is not any change for a certain period of tim
o
4.2.9 Fct. a:Display gross
Use function for brief display of current GROSS weig
Pr
a
Right after operation of [EN
a
E
You have filled a hopper; scale is tared and shows weight of good to be weighed
(=NET). You wish to briefly display totals weight (=GROSS) with no need to clear tare
memory. This function
N
TER] key, current GROSS weight is displayed (in weight
rea) for some seconds.
xample:
briefly outputs current GROSS weight before scale returns to
ET weight display.
BV-H2313 GB 0630 DISOMAT
®
Opus – Operating Manual
- 38 - © Schenck Process GmbH, Darmstadt
To Next Page
Loading...
Need help?
General
