To Next Page

To Previous Page

Setting Mode Setting Using Parameter Password

Code Description

RU2 Output time when second weight transferred to format conversion has been

recorded

S Output setpoint

SC Output number of dumps

SNR Output material number

Sn Output form text (entered at item '461:Form Texts');

n = 1 ... 3;

T Output current Tare weight value; printer output, e.g.: 123.45kg T;

U Output current time, e.g.: 23:59

Yn Output <n> line feeds on printer; n = 1 ... 99;

Y2, e.g., creates 2 line feeds.

Addition of ":dd" to the code variable (e.g. BZ:4) limits the output to the left "dd" digits

of the variable contents.

This replaces to a limited extent the previous possibility to reposition printer output

using Pxx (no longer possible from Version 07).

":dd" has NO influence on code variables B, T, N, NE and LN relevant for certified

applications.

5.2.1.3 Fct. 463:Page Header Format

Use menu item to match current page header format.

ATTENTION: Function '469:Load Default Text' replaces your changes by the

default settings.

After form feed, a page header is output on printer on top of every page. This is of

advantage if your printout covers more than one page.

A new page starts if

• function '34:New Page' is executed via menu tree

• code 'Fn' is output via form format

• internal line counter set by parameter 'Page Lines' has reached set value

(see function '4332:Printer').

Line counter is reset to value '1'.

Operating Sequence

After start of function, input field for presetting of header text format for output in list

form opens:

463:Page Header Format

Page Header Format Y5,P1,S1,P27,S2,P40,S3,Y2___

You can use the formatting codes described with function '462:Form Formats'.

Example: See function '468:Load Default Form'.

DISOMAT

Opus – Operating Manual 0630 BV-H2313 GB

Schenck process Disomat Opus User Manual

Questions and Answers: