Schenck process Disomat Opus - Setting Using Parameter Password

Setting Mode Setting Using Parameter Password
Input field
45:Change Password
Password: ______
opens. Enter current password and acknowledge with [ENTER] key.
Input field
45:Change Password
New Password: ______
opens. Enter new password and acknowledge with [ENTER] key.
Input field
45:Change Password
Repeat Password: ______
opens. Enter new password for the second time.
Acknowledge with [ENTER] key, and display confirms input.
45:Change Password
Password Accepted | Wrong
5.2 Setting Using Parameter Password
After input of Parameter password, you can access
• 'basic functionality' (see Item 4.2)
• additional functions described below (see: Table, Fig.)
Menu Items Comments
42:FUNCTION VARIANT
421:Parameter See Item 5.3 'Setting Using Configuration
Password')
46:PRINT FORM
461:Form texts
462:Form formats
463:Page header format
464:String name
465:EDP format
466:L-F-T mem. format
467:Reset cons. no.
468:Load default form
469:Load default text
Settings for printed output of weigh data.
47:MATERIALS
471:Balances
472:Clear balance
473:Material data
Enter basic material data (balance settings).
48:Fixed Tare Input
Enter or change fixed tare values.
5a:DIAGNOSIS
See BV-H2280
5c: Activate Disoplan interface
See Item 5.2.4.
BV-H2313 GB 0630 DISOMAT
®
Opus – Operating Manual
- 44 - © Schenck Process GmbH, Darmstadt