Schenck process Disomat Opus User Manual

DISOMAT Overview General Control
Ad 3.
Start selected function:
[ENTER] key:
Start function
Once you have started function, number and name of its menu appear in the upper
dialog line.
In the lower dialog line, a note is displayed on the left (e.g. 'Fixed Tare') right next to
the input/output field. (Enter e.g. Fixed1).
Ad 4.
For sequ
fo
Ad 5. and 6.
manual, it is assumed that the function has been started as described above.
ences and special features of dialog control and data input, see item to
llow.
Exit function using the following keys:
Wherever a menu tree function is described in the following chapters of
[OK] key:
With output function: Exit function.
With input function: Exit function and acquire inputs.
+
[ABORT] key:
With output function: Abort function.
With input function: Abort function and reject inputs.
i.e. you are still in
enu tree, can restart selected function or select a new one.
w] as
combination
HIFT]+[UP arrow]. Entered password, if any, is no longer valid.
eat'), system operation is realized using inputs and outputs in the
display.
•
•
.g. 'a:Display Gross) or prompting for data input (e.g. '8:Manual Tare
Input).
explained hereafter. For this kind of interaction, use the input
and control block keys.
Upon exit of function, DISOMAT returns to its state before call,
m
Ad 7.
To return to 'Home Position' (Weight Display) operating state, press key [UP arro
many times as required, or go to home position direct by using key
[S
3.5.2 Data Input/Output
In addition to basic weighing functions and functions with direct effect (e.g.
'35:'PrintRep
You can either display the weight alone or alternately with various system
information in the 'Home Position' operating state (refer to Section 4.1.5).
In 'Menu Tree' operating state, you use the functions responsible for data
output (e
After start of a system function, operation continues in the dialog mode. These simple,
recurring sequences are
BV-H2313 GB 0630 DISOMAT
®
Opus – Operating Manual
- 20 - © Schenck Process GmbH, Darmstadt

Schenck process Disomat Opus Specifications

General

Brand	Schenck process
Model	Disomat Opus
Category	Control Panel
Language	English