Schenck process Disomat Opus User Manual

Event Messages List of Event Messages
Display Text Edit *) Cause Remedy
A0411-5:Parameter Error Balances
A0411-6:Parameter Error Fixed tare
A0411-7:Parameter Error Scale 1 special scales
A0412-7:Parameter Error Scale 2 special scales
A0413-7:Parameter Error Twin-unit special scales
A0411-8:Parameter Error Scale 1 calibration times
A0412-8:Parameter Error Scale 2 calibration times
A0413-8:Parameter Error Twin-unit calibration times
A0411-9:Parameter Error Scale 1 linearization
A0412-9:Parameter Error Scale 1 linearization
A0411-10:Parameter Error Scale 1 times
A0412-10:Parameter Error Scale 2 times
A0413-10:Parameter Error Twin-unit times
A0411-11:Parameter Error Scale 1 dongle/measuring
module assignment
A0412-11:Parameter Error Scale 2 dongle/measuring
module assignment
A0413-13:Parameter Error MULTIRAIL:measuring
modules list for twin-unit
Re-acquire
calibration
parameters.
A0411-17:Parameter Error DISOBOX channel parameters
A0414:Parameter Error Legal-for-trade memory
A0414-10:Parameter Error Unknown/new legal-for-trade
memory
A0419:Parameter Error I/O COMMUNICATION
A0419-1:Parameter Error IO COMMUNICATION analog
output filter
A0420-1:Parameter Error Modbus
A0420-2:Parameter Error Profibus-DP
A0420-3:Parameter Error Interbus
A0420-4:Parameter Error DeviceNet
A0420-5:Parameter Error Modbus/TCP
A0502-nnn:System Error **) Internal error upon initialization
of interface task
Check
configuration.
A0503-1:System Error EDP task initialization No remedy; all
internal
ressources used
A0504-2:System Error First weights invalid
A0504-3:System Error Neither second weights nor
fixed tare values found
A0504-4:System Error No single weights found
A0504-100:System Error Ambiguous text number in
function blocks
A0504-101:System Error Ambiguous text number in
function block outputs
A0505-1:System Error Printer initialization No remedy; not
enough network
channels
A0505-nnn:System Error **) Return value upon opening of
secondary display interface
Check interface
configuration.
BV-H2313 GB 0630 DISOMAT
®
Opus – Operating Manual
- 134 - © Schenck Process GmbH, Darmstadt

Schenck process Disomat Opus Specifications

General

Brand	Schenck process
Model	Disomat Opus
Category	Control Panel
Language	English