Schweitzer Engineering Laboratories SEL-701 - Page 467

Date Code 20010719 701 Motor Protection Relay
SEL-701 Relay Command Summary
The table below lists the serial port commands associated with particular
activities. All Access Level 1 commands are also available in Access Level 2. The
commands are shown in upper-case letters, but can also be entered with lower-case
letters.
Access
Level
Serial Port
Command Command Description Page Number
Serial Port Access Commands
1 HELP Display available commands 6.10
1 2ACCESS Go to Access Level 2 6.11
2 ACCESS Go to Access Level 1 6.11
2 PASSWORD View/change password 6.20
2 QUIT Go to Access Level 1 6.21
Relay Self-Test Status Commands
1 STATUS Display relay self-test status 6.26
2 STATUS R Clear self-test status and restart relay 6.27
Relay Clock/Calendar Commands
1 DATE View/change date 6.12
1 TIME View/change time 6.30
Meter Data Commands
1 METER Display metering data 6.15
1 METER D Display demand and peak demand data 6.16
1 METER E Display energy metering data 6.16
1 METER M Display max/min metering data 6.17
1 METER T Display thermal metering data 6.17
1 METER RD Reset demand ammeter 6.18
1 METER RE Reset energy metering 6.18
1 METER RM Reset max/min metering 6.18
1 METER RP Reset peak demand ammeter 6.18
(Continued)