xv
Date Code 20090730 Instruction Manual SEL-734 Meter
Preface
Safety and General Information
Safety Warnings and Precautions
Use of controls or
adjustments, or
performance of
procedures other than
those specified herein,
may result in
hazardous radiation
exposure.
!
CAUTION
➤ Do not look into the optical port.
➤ Do not perform any procedures or adjustments that are not described in this manual.
➤ During installation, maintenance, or testing of the optical ports only use test
equipment classified as Class 1 laser products.
➤ Incorporated components such as transceivers and laser/LED emitters are not user
serviceable. Units must be returned to SEL for repair or replacement.
Instructions for Cleaning and Decontamination
Use care when cleaning the SEL-734. Use a mild soap or detergent solution and a damp cloth
to clean the chassis. Do not use abrasive materials, polish compounds, or harsh chemical
solvents (such as xylene or acetone) on any surface.
Technical Assistance
Obtain technical assistance from the following address:
Schweitzer Engineering Laboratories, Inc.
2350 NE Hopkins Court
Pullman, WA 99163-5603 USA
Telephone: +1.509.332.1890
Fax: +1.509.332.7990
Internet: www.selinc.com
E-mail: info@selinc.com
Courtesy of NationalSwitchgear.com
To Next Page
Loading...
