xiv
SEL-734 Meter Instruction Manual Date Code 20090730
Preface
Safety and General Information
!
WARNING
Indicates a potentially
hazardous situation
that, if not avoided,
could result in death or
serious injury.
FCC CLASS A WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Class 1 LED Product Compliance Label and Location
The following table shows LED information specific to the SEL-734.
SEL-734 LED Information
Item Detail
Max Optical Output: 3.8 mW
Incorporated LED
Peak Wavelength: 870 nm
Radiant Power: 40 mW typ. (If
a
= 100 mA, tp
b
= 20 ms)
a
If = Forward current
b
tp = Pulse duration
Max Radiant Intensity: 400 mW/sr (If
a
= 100 mA, tp
b
= 20 ms)
Radiant Intensity: 1600 mW/sr (If
a
= 1A, tp
b
= 100 us)
Courtesy of NationalSwitchgear.com
To Next Page
Loading...
