SICK microScan3

microScan3 Core – PROFINET microScan3 Pro – PROFINET
Additional services
1)
•
P
ROFIenergy
•
F_iPar_CRC
•
Acyclic read-/write services for communication via TCI
•
SNTP (client and server)
Length of cable
Devices with RJ45 connec‐
t
ion
≤ 100 m
Devices with SCRJ connec‐
tion
≤ 50 m
Devices with M12 connec‐
t
ion
≤ 100 m
1)
The SNTP server provides the time since the device was switched on.
Electrical data
T
able 41: Electrical data
microScan3 Core – PROFINET microScan3 Pro – PROFINET
Operating data
Protection class III (IEC 61140)
Supply voltage V
S
24 V DC (16.8 V … 30 V DC)
(SEL
V/PELV)
1)
24 V DC (16.8 V to 30 V DC)
(SELV/PELV)
1)
Residual ripple ± 5%
2)
Start-up current ≤ 3 A
Current consumption for 24 V (devices with RJ45 connection)
Operation ≤ 0.45 A (typ. 0.3 A)
Sleep mode Typ. 0.29 A
Current consumption for 24 V (devices with SCRJ connection)
Operation ≤ 0.45 A (typ. 0.35 A)
Sleep mode Typ. 0.35 A
Current consumption for 24 V (devices with M12 connection)
Operation ≤ 0.45 A (typ. 0.3 A)
Sleep mode Typ. 0.29 A
Power consumption (devices with RJ45 connection)
Operation ≤ 11 W (typ. 7.2 W)
Sleep mode Typ. 7 W
Power consumption (devices with SCRJ connection)
Operation ≤ 11 W (typ. 8.4 W)
Sleep mode Typ. 8.4 W
Power consumption (devices with M12 connection)
Operation ≤ 11 W (typ. 7.2 W)
Sleep mode Typ. 7 W
Power-up delay ≤ 45 s (typ. 20 s)
1)
The power supply unit must be able to jumper a brief power failure of 20 ms as specified in
IE
C 60204-1. Suitable power supply units are available as accessories from SICK.
2)
The voltage level must not fall below the specified minimum voltage.
TECHNICAL DATA 13
8021219/1ELL/2022-01-21 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – PROFINET
169
Subject to change without notice