SICK MLG-2 ProNet - Page 27

Name Description Available for
SOPAS ET Fieldbus
I/O configuration Defines the function of Q1
C
–
Switch-off delay Q1,
Q2, Q3 or Q4
Delays the corresponding output
C C
Switch-off delay Q5
through Q16
Delays outputs Q5 through Q16
C C
1)
Available via the performance options.
Table 15: Configurable measuring and diagnostic functions for switching output Q1
Name Available for
SOPAS ET Fieldbus
Function programming for switching output Q1
C C
Alarm Q1
Defines various diagnostic settings for Q1
C
–
I/O configuration
Defines the function of Q1
C
–
Height classification
C C
Object recognition
C C
Object detection/object width
C C
Hole detection/hole size
C C
Outside/inside dimension
C C
Classification of the object position
C C
Classification of the hole position
C C
Height classification within a zone
C C
Object detection/object width within a zone
C C
Classification of the object position within a zone
C C
Measuring within zones
C C
Diagnostics (display of warnings/errors)
C C
Table 16: Auxiliary resources and diagnostic options
Name Description Available for
SOPAS ET Fieldbus
Alignment aid Activates the alignment aid
C C
Values for align‐
ment aid
Returns the values from three beams
C C
“Find Me” function Activates the “Find Me” function
C C
Pushbutton lock Activates/deactivates the pushbutton lock
C C
Beam numbering Reverses the beam numbering
C C
Factory settings Resets the MLG-2 to its factory settings
C C
Cloning upload The device parameter set is saved to the
fieldbus module.
C C
Cloning download The device parameter set is loaded from the
fieldbus module.
C C
Cloning status The cloning status shows the status of the
stored parameters in the fieldbus module.
C C
PRODUCT DESCRIPTION 3
8018748.1Q3I/2024-12-18 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet
27
Subject to change without notice