Configuring the outputs
When the MLG-2 is online, the configuration of the outputs is written to the device
and transferred immediately to the status indicator for the outputs. You will see the
response of the outputs immediately in the status indicator.
Figure 88: Effect of the output configuration on the status indicator
Configuring the performance options
When the MLG-2 is online, the performance options are written to the device and
displayed immediately in the system boundaries (it may be necessary to perform a
teach-in process after changing the performance options).
Figure 89: Effects of the performance options on the system boundaries
8.2.2 User level
The device has different user levels, which have different authorizations to configure
the device. The current user level is displayed in the Log in panel.
CONFIGURATION WITH SOPAS ET 8
8018748.1Q3I/2024-12-18 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet
103
Subject to change without notice
To Next Page
Loading...
