Table 113: User level overview
User level Password Authorization
Operator No password required Machine operators can view
the basic machine parameters.
•
Read only permissions
•
Not all device functions are
visible (e.g. alignment aid).
Maintenance Deactivated ex works, i.e. it
is initially not possible to log
in as a maintenance techni‐
cian. The user level can be
activated by the service user
level (administrator).
The default password
mlgmaint is created ex works.
As a maintenance engineer, all
device parameters can be read
and set.
•
Read and write permissions
•
May activate and deactivate
all functions of the device.
•
May reset device to factory
settings.
•
Can change the password
for this user level.
Service (Administrator) This user level is always acti‐
vated.
The default password mlgser‐
vice is created ex works.
All device parameters can be
read and set with the service
user level. Additional adminis‐
trator settings are possible.
•
Read and write permissions
(incl. all administrator func‐
tions).
•
May activate and deactivate
all functions of the device.
•
May reset device to factory
settings.
•
Can change the password
for this user level and the
password for the Mainte‐
nance user level.
The first time you log in to the device via SOPAS ET, you will be asked to change the
default password.
NOTE
To protect your device, it is strongly recommended that you change the default pass‐
words.
NOTE
To protect your device, it is strongly recommended that you deactivate unused user
levels.
NOTE
If the password for the service user level has been lost: see Reset password for service
user level
Change password
The password can be changed in SOPAS ET at any time. Proceed as follows:
1.
Open the SOPAS ET menu with
2. Under Devices , select the Change password menu item ...
3. Follow the input screwwn and confirm the change using the Change passwordbut‐
ton
8 CONFIGURATION WITH SOPAS ET
104
O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet 8018748.1Q3I/2024-12-18 | SICK
Subject to change without notice
To Next Page
Loading...
