Startup and Administration HiPath 5000 Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
6-22 HiPath 3000/5000 V9, Service documentation
start_h5.fm
Starting HiPath 5000
8. Then click Next.
The Start Copying Files dialog appears.
Check if the correct destination directory and program group are specified and if all neces-
sary components are installed.
9. Click Next to start the copy procedure.
>
At this point your attention is drawn to the fact that a TAPI service provider must
be installed for the current selection of components.
If this requirement is met, click Yes to continue with the procedure.
If there is no TAPI service provider installed, click No to cancel the procedure.
Install the TAPI service provider on the basis of the information in Section 6.6.5.
Then restart the master setup.
>
The PC reboots after installing the MSDE 2000 SQL database.
The installation procedure is automatically continued after rebooting.
To Next Page
Loading...
