Siemens SINUMERIK 808D Function Manual

Function Manual
308 01/2017
If your slides include both PNG
-format images and BMP-format images, number them sepa-
rately. During the slide show, the PNG
-format images will have a higher priority over the
BMP-format images.
2.
Store all the images in a folder on a USB memory sti
ck, and name the folder with the corre-
sponding language code, for example, "chs" for Chinese, "eng" for English. For more info
r-
mation about other available language codes, see Section "
Multi-language support for the
machine manufacturer's HMI data
(Page 200)". Note that a slide show in a non-standard
language works only if this language is loaded on the control system.
3.
Insert the USB stick into the USB interface on the front panel of the PPU.
+
4.
Select the system
data operating area.
5.
Locate the folder(s) containing the slides under the USB directory through the fo
llowing
softkey operations:
→
6.
Select the folder(s) and press this softkey to copy.
7.
Press this softkey to open the window of system
data.
8.
Select the HMI data folder
and press this key to open it.
9.
Move the cursor to the folder highlight
ed as follows:
10.
Press this key to open this folder.

Siemens SINUMERIK 808D Specifications

General

Brand	Siemens
Model	SINUMERIK 808D
Category	Control Unit
Language	English