Function Manual
326 01/2017
Assigning licenses
Requirements
The following prerequisites must be met when you assign a license to a piece of hardware via direct access and the HMI
user interface:
● The control system is powered up.
● The login data for direct access (e.g. per CoL) is available:
– License number
– Dispatch note number
● The type of the control system is available.
● The CF card serial number from the CompactFlash Card system is available.
card serial number displayed is just the one you want to make the assignment for. The assignment of a
license to a piece of hardware cannot be reversed via the Web License Manager.
Select the system data operating area.
→
→
Press these three softkeys in succession. Then you can find the CF
card serial number on
Go to the Web License Manager.
Login via "Direct access":
License number
Dispatch note number
In the Web License Manager, operate step by step as what the Manager tells you.
At the end of the process, the Web License Manager shows
the desired license key.
The following options are now available:
Note down the key.
Save it in a PDF file.
To Next Page
Loading...
Need help?
General
