Siemens SINUMERIK 808D Function Manual

Function Manual
318 01/2017
If no error occurs when importing the activation file, the CNC lock function is a
ctive in the
control system. You can find the lock date being displayed on the HMI screen, for example:
Note
If an error occurs when importing the activation file, an error
-
specific alarm will be issued. The state of the CNC lock function
remains unchanged.
Note
We recommend that th
e machine manufacturer creates a complete commissioning archive over all control system
components after commissioning the machine and activating the CNC lock function. This ensures data consistency for the
CNC lock function. If necessary, this commissioni
ng archive can be used to recommission the control system without
requiring a service call to reactivate the CNC lock function.
Setting the prewarning time
The prewarning time is the time range before reaching the lock date above which alarm 8063 is displayed once daily. The
alarm is a reminder of the lock date, indicating the remaining days before the NC start is locked. The prewarning time is set
via the machine data MD17300 (default = 30) which can be accessed through the following operations:
+ → → →
23.15.7
Extending the CNC lock function
To extend the CNC lock function, the machine manufacturer must use the AMM tool to create a new activation file
with new
lock date
for the CNC lock function.
Creating the activation file
The following data is required to create a new activation file:
● Serial number of the CF card
● Serial number of the PPU
● OEM PIN
●
New lock date
Note
The serial numbers of the CF card and the PPU as well as the OEM PIN must match the values used when the CNC lock
function was activated initially.

Siemens SINUMERIK 808D Specifications

General

Brand	Siemens
Model	SINUMERIK 808D
Category	Control Unit
Language	English