S1: Spindles
16.2 Operating modes
Basic Functions
1254 Function Manual, 09/2011, 6FC5397-0BP40-2BA0
16.2 Operating modes
16.2.1 Overview
Spindle modes
The spindle can have the following modes:
• Control mode
• Oscillation mode
• Positioning mode
• Synchronous mode, synchronous spindle
References:
Function Manual, Extension Functions, Synchronous Spindle (S3)
• Rigid tapping
References:
Programming Manual, Fundamentals; Chapter: Motion commands
Axis mode
The spindle can be switched from spindle mode to axis mode (rotary axis) if the same motor is used for spindle
and axis operation.
To Next Page
Loading...
