Siemens SINUMERIK 828D Function Manual

B1: Continuouspath Mode, Exact Stop, LookAhead
3.10 Data lists
Basic Functions
214 Function Manual, 09/2011, 6FC5397-0BP40-2BA0
3.10.3 Signals
3.10.3.1 Signals from channel
3.10.3.2 Signals from axis/spindle
Signal name SINUMERIK 840D sl SINUMERIK 828D
All axes stationary DB21, ... .DBX36.3 DB3300.DBX4.3
Signal name SINUMERIK 840D sl SINUMERIK 828D
Position reached with exact stop coarse DB31, ... .DBX60.6 DB390x.DBX0.6
Position reached with exact stop fine DB31, … .DBX60.7 DB390x.DBX0.7

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash