Siemens SINUMERIK 828D

H2: Auxiliary function outputs to PLC
8.18 Data lists
Basic Functions
474 Function Manual, 09/2011, 6FC5397-0BP40-2BA0
8.18.2 Signals
8.18.2.1 Signals to channel
8.18.2.2 Signals from channel
22230 AUXFU_H_SYNC_TYPE H functions output time
22240 AUXFU_F_SYNC_TYPE F functions output time
22250 AUXFU_D_SYNC_TYPE D functions output time
22252 AUXFU_DL_SYNC_TYPE DL functions output time
22254 AUXFU_ASSOC_M0_VALUE Additional M function for program stop
22256 AUXFU_ASSOC_M1_VALUE Additional M function for conditional stop
22530 TOCARR_CHANGE_M_CODE M code for change of tool holder
22532 GEOAX_CHANGE_M_CODE M code for replacement of geometry axes
22534 TRAFO_CHANGE_M_CODE M code for change of tool holder
22560 TOOL_CHANGE_M_CODE Auxiliary function for tool change
Signal name SINUMERIK 840D sl SINUMERIK 828D
Activate associated M01 DB21, ... .DBX30.5 DB3200.DBX14.5
Signal name SINUMERIK 840D sl SINUMERIK 828D
M function 1 - 5 change DB21, ... .DBX58.0-4 DB2500.DBX4.0-4
M function 1 - 5 not decoded DB21, ... .DBX59.0-4 -
S function 1 - 3 change DB21, ... .DBX60.0-2 DB2500.DBX6.0
S function 1 - 3 quick DB21, ... .DBX60.4-6 -
T function 1 - 3 change DB21, ... .DBX61.0-2 DB2500.DBX8.0
T function 1 - 3 quick DB21, ... .DBX61.4-6 -
D function 1 - 3 change DB21, ... .DBX62.0-2 DB2500.DBX10.0
D function 1 - 3 quick DB21, ... .DBX62.4-6 -
DL function change DB21, ... .DBX63.0 -
DL function quick DB21, ... .DBX63.4 -
H function 1 - 3 change DB21, ... .DBX64.0-2 DB2500.DBX12.0-2
H function 1 - 3 quick DB21, ... .DBX64.4-6 -
F function 1 - 6 change DB21, ... .DBX65.0-5 -
M function 1 - 5 quick DB21, ... .DBX66.0-4 -
F function 1 - 6 quick DB21, ... .DBX67.0-5 -
Extended address M function 1 (16 bit int) DB21, ... .DBB68-69 DB2500.DBB3004
M function 1 (DInt) DB21, ... .DBB70-73 DB2500.DBD3000
Extended address M function 2 (16 bit int) DB21, ... .DBB74-75 DB2500.DBB3012
M function 2 (DInt) DB21, ... .DBB76-79 DB2500.DBD3008
Number Identifier: $MC_ Description