Siemens SINUMERIK 828D

K2: Axis Types, Coordinate Systems, Frames
10.7 Restrictions
Basic Functions
804 Function Manual, 09/2011, 6FC5397-0BP40-2BA0
10.7 Restrictions
There are no supplementary conditions to note.
10.8 Examples
10.8.1 Axes
Axis configuration for a 3axis milling machine with rotary table
1. Machine axis: X1 Linear axis
2. Machine axis: Y1 Linear axis
3. Machine axis: Z1 Linear axis
4. Machine axis: B1 Rotary table (for turning for multiface machining)
5. Machine axis: W1 Rotary axis for tool magazine (tool revolver)
6. Machine axis: C1 (Spindle)
1. Geometry axis: X (1. channel)
2. Geometry axis: Y (1. channel)
3. Geometry axis: Z (1. channel)
1. Special axis: B (1. channel)
2. Special axis: WZM (1. channel)
1. spindle: S1/C (1. channel)