W1: Tool offset
18.12 Working with tool environments
Basic Functions
1574 Function Manual, 09/2011, 6FC5397-0BP40-2BA0
18.12 Working with tool environments
18.12.1 General
Functions
The current states of tool data can be processed using the functions below, which are generally available:
•Save
•Deletion
•Read
• Modify
A further function can be used to determine information about the assignment of the tool lengths of the active tool
to the abscissa, ordinate and applicate.
18.12.2 Saving with TOOLENV
Scope of a tool environment
The TOOLENV memory function is used to save any current states needed for the evaluation of tool data stored in
the memory.
The individual data are as follows:
• The active G code of group 6 (G17,G18,G19)
• The active G code of group 56 (TOWSTD, TOWMCS, TOWWCS, TOWBCS, TOWTCS, TOWKCS)
• The active transverse axis
To Next Page
Loading...
