Siemens SINUMERIK 828D Function Manual

W1: Tool offset
18.12 Working with tool environments
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
1577
The first call format deletes all data sets.
The second call format deletes the data set with the specified name.
Data sets can only be deleted using the DELTOOLENV command, by an INITIAL.INI download or by a cold start
(NCK powerup with default machine data). There are no further automatic deletion operations (e.g., on RESET).
Syntax:
There are two call formats:
Status = DELTOOLENV()
Status = DELTOOLENV(_NAME)
Value/parameter:
Status
INT
0: Function OK
-1: No memory reserved for tool environments:
MD18116 $MN_MM_NUM_TOOL_ENV = 0 (number of tool environments in TO
area).
i.e. the "tool environments" functionality is not available.
-2: A tool environment with the specified name does not exist.
_NAME
STRING
Name of data set to be deleted

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash