Preface
Basic Functions
4 Function Manual, 09/2011, 6FC5397-0BP40-2BA0
SINUMERIK
You can find information on SINUMERIK under the following link:
www.siemens.com/sinumerik
Target group
This publication is intended for:
• Project engineers
• Technologists (from machine manufacturers)
• System startup engineers (Systems/Machines)
• Programmers
Benefits
The function manual describes the functions so that the target group knows them and can select them. It
provides the target group with the information required to implement the functions.
Standard version
This documentation only describes the functionality of the standard version. Extensions or changes made by the
machine tool manufacturer are documented by the machine tool manufacturer.
Other functions not described in this documentation might be executable in the control. This does not, however,
represent an obligation to supply such functions with a new control or when servicing.
Further, for the sake of simplicity, this documentation does not contain all detailed information about all types of
the product and cannot cover every conceivable case of installation, operation or maintenance.
Technical Support
You will find telephone numbers for other countries for technical support in the Internet under
http://www.siemens.com/automation/service&support
Information on the structure and contents
Installation
Structure of this Function Manual:
• Inner title (page 3) with the title of the Function Manual, the SINUMERIK controls as well as the software and
the version for which this version of the Function Manual is applicable and the overview of the individual
functional descriptions.
• Description of the functions in alphabetical order (e.g. A2, A3, B1 etc.)
To Next Page
Loading...
Need help?
General
