*) If the outputs for the illuminated pushbuttons (X53/X54) are loaded with the max. permissible current
of 0.3 A, this results in additional power consumption of 36 W. The total power consumption is then 50
W.
See also
Other values/standards: Chapter "Application planning (Page 35)"
7.4.6 Spare parts and accessories
Table 7-33 Accessories and spare parts for MCP 310C PN
Name Description Amoun
t
Article number
Emergency-Stop
button
22 mm actuating element, 40 mm mushroom
pushbutton, snap action with tamper protec‐
tion, latching, red, with holder, non-illumina‐
ted
1 3SB3000-1HA20
Contact block with 2 contact pairs (1 NO + 1 NC), 2-pin,
screw terminal (3rd contact pair can be addi‐
tionally connected)
1 3SB3400-0A
Sets of keys Set of keys (10 sets) for machine control pan‐
el
1 set 6FC5148–0AA03–0AA0
Set of tensioners Tensioner set (9 items) for supplementary
components with 2.5 mm profile, length 20
mm
1 set 6FC5248–0AF14–0AA0
Override
Spindle rotary
switch
Spindle/rapid traverse override, electronic ro‐
tary switch 1x16G, T=24, cap, knob, pointer,
spindle and rapid-traverse dials
1 6FC5247–0AF12–1AA0
Override
Feed rotary switch
Override feedrate / rapid traverse electronic
rotary switch 1x23G, T=32, cap, knob, point‐
er, feedrate and rapid-traverse dials
1 6FC5247–0AF13–1AA0
Key cap Square, can be labeled by laser, 1 set of 90,
ergo-gray and 20 each of red / green / yellow /
medium gray
1 6FC5248–0AF12–0AA0
Key cap Square, for inscription plates, 1 set of 90,
clear
1 6FC5248–0AF21–0AA0
Cable set For additional MCP control devices, length
500 mm
60 6FC5247-0AA35-0AA0
Accessories pack (for delivery ex works):
Component Description Amount
Keyset Key caps for turning (labeled) 9
Ergo gray key caps (can be labeled) 30
Clear key caps (can be labeled) 30
Yellow backing plate for emergency stop 1
Anschließbare Komponenten
7.4 MCP 310C PN
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4 153
To Next Page
Loading...
Need help?
General
