7.9 PP 72/48D 2/2A PN
7.9.1 Description
Features
The I/O module is a simple module (without a separate enclosure) for connecting digital and
analog input/outputs as part of an automation system based on PROFINET IO.
The module has the following important features:
● 72 digital inputs and 48 digital outputs
● Two analog inputs and two analog outputs
Analog process signals such as for detecting temperatures or controlling hydraulic
workholders can be implemented via analog inputs/outputs.
● PROFINET IO connection (max. 100 MBaud)
● On-board status display via six LEDs
● The three plug-in connectors for the digital inputs and outputs are 50-pin terminal posts for
connecting ribbon cables.
● The use of terminal strip converters or the direct connection of distribution boards is
possible.
● Analog signal cables can be connected directly to terminal contacts on the module.
An external power supply unit (24 VDC) is required to supply the module and the digital outputs.
Anschließbare Komponenten
7.9 PP 72/48D 2/2A PN
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4 213
To Next Page
Loading...
Need help?
General
