Siemens SINUMERIK 828D

Name Designation Color Description
H5 DIAG2 Green Reserved
H6 OVTemp Red Overtemperature indication
Note
When the system is booting, LEDs H1, H2 and H3 are lit.
7.9.2 Assembling
Mounting
The I/O module is screwed with a mounting plate to the control cabinet wall in the control
cabinet. The module must be installed according to EN 60204.
WARNING
Protection against electric shock
A protective conductor must be connected using the grounding screw.
Mounting versions:
● Portrait mounting at the lateral strap of the mounting plate (2x M5 or M6 screws).
● Flat mounting at the rear wall of the mounting plate (4x M5 or M6 screws).
Anschließbare Komponenten
7.9 PP 72/48D 2/2A PN
PPU and components
216 Manual, 05/2015, 6FC5397-2DP40-3BA4