Siemens SINUMERIK 828D Manual

Further information
You can find further information on the MODEM MD720 on the Internet at:
● MODEM MD720 (
https://support.industry.siemens.com/cs/mdm/102401328?
c=70936043019&pnid=15923&lc=en-WW)
● Antenna ANT794-4MR (http://support.automation.siemens.com/WW/view/en/22726648)
Spare parts and accessories
9.2 MODEM MD720
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4 265

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash