Siemens SINUMERIK 828D Manual

Cable specification for X130 and X127
Feature Version
Connector type RJ45 socket with 180° cable outlet
Cable type Industrial Ethernet cable (CAT5)
Max. cable length 100 m
Note
The X127 interface does not support auto crossing. If the Ethernet port of the connected PC
or modem does not support auto-crossing, a crossed Ethernet cable must be used.
Interface description
6.3 Ethernet
PPU and components
72 Manual, 05/2015, 6FC5397-2DP40-3BA4

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash